International Spring Company
Warnock Spring and Mfg. Co.

7901 N. Nagle Avenue
Morton Grove, Illinois 60053-2714
(847) 470-8170
[Company Logo Image]

Torsion Spring

                QS 9000 COMPLIANT                       ISO 9002 REGISTERED

entlogs.jpg (2097 bytes)Home Feedbackentlogs.jpg (2097 bytes)

Custom Torsion Spring
Request for Quotation Form
calc.gif (14873 bytes)

[Product Image]

To request a quotation on custom torsion springs, please complete as much information as possible, and it will be e-mailed to our Customer Service Department.

We have the capabilities to do the following wire sizes:
.015" to .148" torsion wire diameter .024" to .162" double torsion wire diameter and an Outside diameter of .090" to 2.50"

Select the items that apply, and then let us know how to contact you.

Measurement units: English ( in.) or Metric (mm)

1. To work over in. dia. shaft

2. Outside Diameter
a. in. +/- in. or
b. in. max.

3. Inside Diameter
a. in. +/- in. or
b. in. min.

4. Torque in-lb. +/- in-lb. @ deg.
    Torque in-lb. +/- in-lb. @ deg.

5. Length of space available in.

6. Maximum wound position turns or deg. from
    free position.

7. Length of moment are (R) in.

8. Direction of helix
Left
Right

9. Type of ends

 

Advisory Data
1. Wire diameter          in.
2. Mean coil diameter  in.
3. No. of active coils   
4. Rate                         in.-lbs. per turn (360 deg.) 
5. Theta(F)=                deg. free angle reference

 

Special Information
1. Type of material                 
2. Finish                                  
3. Frequency of rotation,          cycles/sec.
    and working range Theta=    deg.
                               to Theta=  deg. deflection
4. Operating temp                    deg. F
5. End use or application

6. Other Comments

7. Quantities you would like quoted:

Name
Title
Company
Address
Country
E-mail
Phone
Fax

 

 

[ Home ] [ Up ]

Send mail to info@internationalspring.com with questions or comments about this web site.
Copyright © 1998 International Spring Company
Last modified: May 30, 2003